easyTRX2 - Regatta Tracking

Go to content

Main menu:



■ AIS ClassB CS Receiver
■ certified by BSH (BSH / 46162 / 4320939 / 10)
■ Easy installation and use
■ PC-software for configuration included
■ Software for AIS data display on screen




Like its predecessor the easyRX2S receives Class A and Class B AIS signals in accordance with the Class B-standard.
It was made even more powerful with new features:
The device now comes with a USB-port. With use of software, you can select between 38400 or 4800 Baud data rate. There are 8 LEDs for a convenient display of every active feature. The new easyRX2S has got an independent CPA-Alarm algorithm to interpret incoming data immediately. TXR2 can also be used as a power source for an external CPA alarm signal as well. The TRX2 has got an SD Card Recorder to record all data like a “black box”. Three gadgets
with different Baud rates can be connected by means of an integrated multiplex input. Last but not least there are various separated cable harnesses to activate “Silent Mode” or “Mayday.
AIS” permanent signal by tripper-switch.

Requirements for the easyTRX2S

You need separate VHF and GPS antennas for the easyRX2S. However, it works alternatively with easy SPLIT OCB connected to the existing VHF antenna. Nevertheless a separate GPS antenna is a must-have. As another alternative Weatherdock offers the VHF/GPS combination antenna easyRX ANT for the easyRX2S.



  • AIS receiver with integrated GPS receiver

  • 2 receiver (one receiver switches between AIS and DSC channel)

  • Responsiveness: -107 dBm

  • Data rate: 38.400 or 4800 Baud, bi-directional

  • NMEA telegram: VDM

  • GPS receiver corresponding to IEC61108

  • Adapter VHF antenna: 50 Ohm, SO239

  • Adapter GPS antenna: 50 Ohm, TNC

  • Adapter onboard electric supply: 10 V – 32 V DC

  • 198 mm (L) / 158 mm (W) / 47 mm (H)

Weight: 375 grams (approx.)


Advantages compared to competitors:  

  • Separate cables for “silent” or “mayday-AIS” for persistent signal

  • Additional USB-Port

  • 38400 or 4800 baud rate select with software

  • Operating display with 8 LEDs

  • CPA-Alarm even without plotter connected

  • Can be used as power source for external CPA signal

  • easyCPA A052 / easyCPA³ A056 misc. Equipment

  • Enlarged voltage input 10-32V DC

  • SD Card Recorder for black box employment

  • Multiplexer integrated

  • AIS-S.A.R.T. Alarm even with disconnected plotter

Back to content | Back to main menu